英语翻译从田间行驶到公路上换档时,发现挂不上挡,把变速箱电磁阀（solenoid）拆下来,挂行驶挡位后再把电磁阀(solenoid)重新安装好,可以行驶.工作的时候再把电磁阀(solenoid)更换过来.经检查,发现割台提升压力传感器(electricad coil)有烧蚀的现象,而且与传感器(electricad coil)内壁连接的铁心螺杆(solenoid valve)上也不是很光滑.
网友回答
Driving down the road from the field shift,it was found hanging not on the block,the transmission electromagnetic valve (solenoid) removed,and then hang the solenoid valve driving gear (solenoid) re-installed,you can travel.Then when the solenoid valve work (solenoid) replaced over.
The inspection found that cession of Taiwan to enhance the pressure sensor (electricad coil) had ablation of the phenomenon,and the sensor (electricad coil) connected to core wall screw (solenoid valve) on a not very smooth.
======以下答案可供参考======
供参考答案1:
Driving down the road from the field shift, it was found hanging not on the block, the transmission electromagnetic valve removed, hanging gear after driving back to the solenoid valve is installed, you can travel. Work over time then the solenoid valve replacement.
The inspection found that cession of Taiwan to enhance the phenomenon of ablation pressure sensor and the sensor on the wall connected to the screw core is not very smooth.
供参考答案2:
From the field, driving to the highway shift, found on the block, hang not gearbox electromagnetic valve, hang down driving gears then put the solenoid valves re-install is good, can travel. Work then bring electromagnetic valve change over.
Upon examination, found cut sets ascension pressure sensor have ablation phenomenon and with sensors wall connection solenoid valve core screw is not very smooth.